Safety LineMark is a pure acrylic emulsion paint for application to tar/bitumen and concrete roads.
Advantage:
- ZERO V.O.C. (Volatile Organic Compounds)
- No noxious fumes or odours during application
- Quick drying
- Low dirt pick up
- Supplied ready for brush, roller or spray application
- Excellent adhesion properties
- Cleaning of equipment is conducted with water
- Drying time: 30 minutes @ 21º Celsius
- Can be applied to buffers, concrete, metal and tar
- Water clean up
- No noxious fumes during application
- Less frequent applications
- Will not flake or deteriorate like conventional paint
- Will maintain its sheen
- Excellent glass bead’s retention
Applications:
Safety Line Marking is specifically designed to be applied to the following road surfaces:
- Tar
- Bitumen
- Concrete
Preparation:
All surfaces must be thoroughly cleaned and free of any loose particles.
Technical info:
Clean up: Clean all equipment thoroughly with water immediately after use
Colours: White, Yellow and Red with sheen finish, and Black with matt finish. Any colour really
Thinners: Must not be thinned
Solids: Approximately 65% by mass
Flash point: Not flammable
Shelf life: Minimum 2 years +
The normal spreading rate for Safety LineMark is 4m2/litre at 25 micrometers Dry Film Thickness (DFT) on a smooth surface. However, a practical calculation is required for separate substrates.
Preparation:
Please refer to preparation manual
Remark:
Clean all equipment thoroughly with water immediately after use. Keep containers well sealed. Store at moderate temperatures.
Disposal:
Allow unwanted paint to dry for a day within its container and peel off. Dispose of waste paint in general household waste or equivalent and recycle the container.